QESTonline - User contributions [en]

Template:QEST Platform 4.5.3087

2018-06-18T06:08:05Z

Gavin.schultz:

==QEST Platform 4.5.3087==
{| class="wikitable"
! Issue key !! Support reference !! Release notes
|-
| QPM-1950 || QPS-1337 || Adding or editing a Nuclear Density test in QESTField no longer throws errors with the text "_Unable to find a matching source properties for: MaximumDryDensity_". This error only occurred when there were valid California Bearing Ratio candidates for importing to the Nuclear Density test.
|-
| QPM-1953 || QPS-1347 || Signing work-order level external test reports no longer automatically locks all samples under the work order. Samples will only be locked if they contain any mappings to those types of samples e.g. signing an external test report which displays concrete sample IDs will lock all concrete samples on the work order.
|-
| QPM-1908 || || The query for finding Particle Size Distribution tests, used on Proctor/Maximum Dry Density test screens is now indexed. This means Proctor/Maximum Dry Density test screens will load faster.
|-
| QPM-1917 || || The calculation for Adjusted Optimum Moisture Content has been fixed for the _Maximum Dry Density - Standard [AS 1289.5.1.1]_ and _Maximum Dry Density - Modified [AS 1289.5.2.1]_ screens.
|-
| QPM-1939 || || Equipment items which are newly added to QESTLab will no longer be considered "out of service" in QESTField. These equipment items will no longer be arbitrarily cleared in QESTField workflows.
|-
| QPM-1452 || QPS-506 || "The _Relative Compaction (NZS)_ screens will now show 'Assumed Solid Density' or 'Measured Solid Density' based on the type of the imported Maximum Dry Density results.

If 'External' or '(none)' are selected for the Maximum Dry Density, a checkbox will be shown next to the label for 'Solid Density' that will allow the user to specify whether the value is Assumed or not."
|-
| QPM-1505 || || The _Binder Film Thickness [Q317]_ screen has been updated so that it will import the necessary values for calculating the Proportions of Course Aggregate, Proportions of Fine Aggregate and Proportions of Filler from a sibling _Grading [Q308A]_ test even when a _Binder Content [Q308A]_ screen exists. The Binder Content will be imported from the _Grading [Q308A]_ screen if it exists, else it will be imported from a sibling _Binder Content [Q308A]_.
|-
| QPM-1508 || QPS-520 || The calculation for constant dry mass, on the _Atterberg Limits [NZS 4407:1991 Tests 3.2-3.4]_ test screen, will now subtract the container mass prior to making the calculation.
|-
| QPM-1512 || QPS-521 || The ordering of test reports will now be consistent for reports. The tests will be ordered by name in ascending order and then by created date in descending order.
|-
| QPM-1532 || QPS-542 || A person node is no longer added to Work Templates that are created from the current Work Order.
|-
| QPM-1578 || || A bug that resulted in a 'Catastrophic Error' when changing between screens quickly, has now been fixed.
|-
| QPM-1734 || QPS-518 || The fines ratio method has been change from MTRS05 to Q103A when reporting the _Grading [Q103A]_ and _Particle Size Distribution of Soil - Wet Sieving [Q103A]_ test screens.
|-
| QPM-1740 || QPS-523 || On the _Specific Gravity and Absorption of Fine Aggregate [ASTM C 128]_ test screens, the temperature warning will now be applied to the corrected temperature instead of the entered reading.
|-
| QPM-1841 || QPS-995 || Management Reports - Filters used for management reports now have QestOwnerLabNo added to the select clause automatically. This resolves an issue where the wrong specification limits would sometimes be selected if more than one specification had the same name (at different laboratories).
|-
| QPM-1855 || QPS-887 || AAA MT-001 - Marshall Test Properties of Asphalt Mixes for Airports - Average voids in aggregate is now calculated and reported.
|-
| QPM-1871 || QPS-1059 || "AS 2891.7.1:2004 - Maximum Density Test Screen (superseded) - the calculation has been corrected to use the ""on balance"" method.

Note that this test method is superseded. The current version of this test method (AS 2891.7.1:2015) allows the user to select whether the ""on balance"" or ""under balance"" method is used."
|-
| QPM-1875 || QPS-1030, QPS-1041 || External documents (printable worksheets, dynamic worksheets, external test reports, etc) no longer make use of long-lived record-sets. This helps to avoid a situation where a database transaction would be committed or rolled back while the record set is still in use, resulting in an error message "Catastrophic Failure".
|-
| QPM-1876 || || "If the Concrete Plant and/or Concrete Supplier lists are configured to allow free entry items, the following issues have been fixed.
* If Supplier is free entered on a concrete sample, it will no longer get cleared if a Plant or Product is selected, when using the bulk entry.
* If a Plant is free entered, it will no longer get cleared if a Product is selected, when using the bulk entry."
|-
| QPM-1877 || QPS-1018 || "AAA MT-001 - Marshall Test Properties of Asphalt Mixes for Airports - The test screen now recalculates all results when the test screen is opened. This ensures that updated values from other tests (such as bitumen content) will be used in the calculation.

Note that users need to reload the AAA MT-001 screen to trigger the calculation."
|-
| QPM-1888 || || "Proctor Tests (US test methods) - Grid Data Entry views are now available for the following proctor test methods, allowing them to be marked as inactive using filters in the Documents section of QESTLab:
* 11284 || Maximum Index Density \[ASTM D4253] *
* 110038 || Proctor - Standard (Metric) \[MnDOT 1305]
* 110039 || Proctor - Standard \[MnDOT 1305]
* 110050 || Proctor - Standard \[AASHTO T 99 - 10]
* 110051 || Proctor - Standard (Metric) \[AASHTO T 99 - 10]
* 110052 Proctor - Standard \[ASTM D 698] - 2012
* 110053 || Proctor - Standard (One-Point Verification) \[ASTM D 698]
* 110054 || Proctor - Standard (One-Point Verification) (Metric) \[ASTM D 698]
* 110080 || Michigan One-Point T99 *
* 110081 || Michigan Modified T180 *
* 110090 || Proctor - Standard \[AASHTO T 99 - 15]
* 110091 || Proctor - Modified \[AASHTO T 180 - 15]
* 110095 || Proctor - Standard \[AASHTO T 99 - 2015] *
* 110096 || Proctor - Modified \[AASHTO T 180 - 2015] *
* 110097 || Proctor - Standard (Metric) \[ASTM D 698] *
* 110400 || Proctor - Standard (Metric) \[ASTM D 698 - 07]
* 110401 || Proctor - Modified (Metric) \[ASTM D 1557 - 07]
* 110408 || Proctor - Standard (Metric) \[AASHTO T 99 - 01]
* 110409 || Proctor - Modified (Metric) \[AASHTO T 180 - 01]
* 110410 || Proctor - Modified (Metric) \[AASHTO T 180 - 11]
* 110413 || Proctor - Modified (Metric) \[ASTM D 1557 - 12] *
* 110414 || Proctor - Modified \[ASTM D 1557 - 12] *
* 110779 || Moisture-Density Relations of Base Material and Cohesionless Sand (Metric) \[Tex-113-E]
|-
| QPM-1893 || || Error messages that are displayed in QEST Scheduler now include information from QESTNet about the error that occurred.
|-
| QPM-1895 || QPS-1139 || Unconfined Compressive Strength Summary Test Report (Q 115) - no longer causes run time error error 91 when loading.
|-
| QPM-1896 || QPS-1167 || Remarks entered on the Daily Field Inspection test screen are no longer cleared when clicking on the info button and then off the test screen.
|-
| QPM-1897 || || Complex List Permissions set at the lab level now restrict users in accordance to the permissions granted. A common symptom of this was that a number of permission checks were only made against the global/default lab rather than for specific labs i.e. users who only had permissions at specific labs would not be able to access those lists at all.
|-
| QPM-1900 || || Options - General - The description of the Overwrite Checked by Status and Overwrite Tested by Status has been fixed so that it lines up with the actual behaviour of the options.
|-
| QPM-1907 || || A bug that resulted in a 'Catastrophic Failure when changing between laboratories and lists has now been fixed.
|-
| QPM-1910 || QPS-1220 || The value for Average Least Dimension on the _Average Least Dimension Calculation [AS 1141.20.3]_ Test Screen will now only be calculated if a value for 'Passing Largest Sieve' and 'Flakiness Index' has been provided.
|-
| QPM-1919 || QPS-1269 || The Time Sampled and Time Moulded will now show on the Concrete Test Report (AU), even when the Date Batched is not set.
|-
| QPM-1920 || || "A new menu item, call 'Display Document Identifiers', has been added to the view menu in QESTLab. This option is only available when a document has been selected in the tree. When this item is selected a form will be displayed that will show the following about the current selected document:
QestID - The internal QestID of the current document/screen.
QestUniqueID - An internal ID that uniquely identifies the instance of the current document/screen.
QestUUID - An internal universial ID that uniquely identifies the instance of the current document/screen."
|-
| QPM-1921 || QPS-1270 || "Q214A test portion results tolerances have been corrected
- Particle Density on a Dry Basis (t/mÂ³): 0.023 -> 0.032
- Particle Density on an SSD Basis (t/mÂ³): 0.019 -> 0.027
- Apparent Particle Density (t/mÂ³): 0.019 -> 0.027
- Water Absorption (%): 22 -> 0.31"
|-
| QPM-1926 || || The _Assigned Maximum Density [AS 1289.5.4.2]_ screen has been updated to allow the results of reduced test screens to be imported. Results can be imported from both the "standard effort" _Maximum Dry Density [AS 1289.5.1.1] *_ and "modified effort" _Maximum Dry Density [AS 1289.5.2.1] *_ tests.
|-
| QPM-1935 || || QESTLab test report scripting, that uses the function "Custom.SQL(...)", now has better logging, if errors occur in the processing.
|-
| QPM-1938 || QPS-1311 || Flakiness tests "AS 1141.15" and "RC302.11", which by default would 'ignore grading results', now default to use the grading results.
|-
| QPM-1942 || || Custom Fields will now correctly cross-fill on parent samples, when adding a test workflow in QESTField.
|}

Template:QEST Platform 4.5.3087

2018-06-15T04:28:01Z

Gavin.schultz:

==QEST Platform 4.5.3087==
{| class="wikitable"
! Issue key !! Support reference !! Release notes
|-
| QPM-1950 || QPS-1337 || Adding or editing a Nuclear Density test in QESTField no longer throws errors with the text "_Unable to find a matching source properties for: MaximumDryDensity_". This error only occurred when there were valid California Bearing Ratio candidates for importing to the Nuclear Density test.
|-
| QPM-1953 || QPS-1347 || Signing work-order level external test reports no longer automatically locks all samples under the work order. Samples will only be locked if they contain any mappings to those types of samples e.g. signing an external test report which displays concrete sample IDs will lock all concrete samples on the work order.
|-
| QPM-1908 || || The query for finding Particle Size Distribution tests, used on Proctor/Maximum Dry Density test screens is now indexed. This means Proctor/Maximum Dry Density test screens will load faster.
|-
| QPM-1917 || || The calculation for Adjusted Optimum Moisture Content has been fixed for the _Maximum Dry Density - Standard [AS 1289.5.1.1]_ and _Maximum Dry Density - Modified [AS 1289.5.2.1]_ screens.
|-
| QPM-1939 || || Equipment items which are newly added to QESTLab will no longer be considered "out of service" in QESTField. These equipment items will no longer be arbitrarily cleared in QESTField workflows.
|-
| QPM-1452 || QPS-506 || "The _Relative Compaction (NZS)_ screens will now show 'Assumed Solid Density' or 'Measured Solid Density' based on the type of the imported Maximum Dry Density results.

If 'External' or '(none)' are selected for the Maximum Dry Density, a checkbox will be shown next to the label for 'Solid Density' that will allow the user to specify whether the value is Assumed or not."
|-
| QPM-1505 || || The _Binder Film Thickness [Q317]_ screen has been updated so that it will import the necessary values for calculating the Proportions of Course Aggregate, Proportions of Fine Aggregate and Proportions of Filler from a sibling _Grading [Q308A]_ test even when a _Binder Content [Q308A]_ screen exists. The Binder Content will be imported from the _Grading [Q308A]_ screen if it exists, else it will be imported from a sibling _Binder Content [Q308A]_.
|-
| QPM-1508 || QPS-520 || The calculation for constant dry mass, on the _Atterberg Limits [NZS 4407:1991 Tests 3.2-3.4]_ test screen, will now subtract the container mass prior to making the calculation.
|-
| QPM-1512 || QPS-521 || The ordering of test reports will now be consistent for reports. The tests will be ordered by name in ascending order and then by created date in descending order.
|-
| QPM-1532 || QPS-542 || A person node is no longer added to Work Templates that are created from the current Work Order.
|-
| QPM-1578 || || A bug that resulted in a 'Catastrophic Error' when changing between screens quickly, has now been fixed.
|-
| QPM-1734 || QPS-518 || The fines ratio method has been change from MTRS05 to Q103A when reporting the _Grading [Q103A]_ and _Particle Size Distribution of Soil - Wet Sieving [Q103A]_ test screens.
|-
| QPM-1740 || QPS-523 || On the _Specific Gravity and Absorption of Fine Aggregate [ASTM C 128]_ test screens, the temperature warning will now be applied to the corrected temperature instead of the entered reading.
|-
| QPM-1841 || QPS-995 || Management Reports - Filters used for management reports now have QestOwnerLabNo added to the select clause automatically. This resolves an issue where the wrong specification limits would sometimes be selected if more than one specification had the same name (at different laboratories).
|-
| QPM-1855 || QPS-887 || AAA MT-001 - Marshall Test Properties of Asphalt Mixes for Airports - Average voids in aggregate is now calculated and reported.
|-
| QPM-1871 || QPS-1059 || "AS 2891.7.1:2004 - Maximum Density Test Screen (superseded) - the calculation has been corrected to use the ""on balance"" method.

Note that this test method is superseded. The current version of this test method (AS 2891.7.1:2015) allows the user to select whether the ""on balance"" or ""under balance"" method is used."
|-
| QPM-1876 || || "If the Concrete Plant and/or Concrete Supplier lists are configured to allow free entry items, the following issues have been fixed.
* If Supplier is free entered on a concrete sample, it will no longer get cleared if a Plant or Product is selected, when using the bulk entry.
* If a Plant is free entered, it will no longer get cleared if a Product is selected, when using the bulk entry."
|-
| QPM-1877 || QPS-1018 || "AAA MT-001 - Marshall Test Properties of Asphalt Mixes for Airports - The test screen now recalculates all results when the test screen is opened. This ensures that updated values from other tests (such as bitumen content) will be used in the calculation.

Note that users need to reload the AAA MT-001 screen to trigger the calculation."
|-
| QPM-1888 || || "Proctor Tests (US test methods) - Grid Data Entry views are now available for the following proctor test methods, allowing them to be marked as inactive using filters in the Documents section of QESTLab:
* 11284 || Maximum Index Density \[ASTM D4253] *
* 110038 || Proctor - Standard (Metric) \[MnDOT 1305]
* 110039 || Proctor - Standard \[MnDOT 1305]
* 110050 || Proctor - Standard \[AASHTO T 99 - 10]
* 110051 || Proctor - Standard (Metric) \[AASHTO T 99 - 10]
* 110052 Proctor - Standard \[ASTM D 698] - 2012
* 110053 || Proctor - Standard (One-Point Verification) \[ASTM D 698]
* 110054 || Proctor - Standard (One-Point Verification) (Metric) \[ASTM D 698]
* 110080 || Michigan One-Point T99 *
* 110081 || Michigan Modified T180 *
* 110090 || Proctor - Standard \[AASHTO T 99 - 15]
* 110091 || Proctor - Modified \[AASHTO T 180 - 15]
* 110095 || Proctor - Standard \[AASHTO T 99 - 2015] *
* 110096 || Proctor - Modified \[AASHTO T 180 - 2015] *
* 110097 || Proctor - Standard (Metric) \[ASTM D 698] *
* 110400 || Proctor - Standard (Metric) \[ASTM D 698 - 07]
* 110401 || Proctor - Modified (Metric) \[ASTM D 1557 - 07]
* 110408 || Proctor - Standard (Metric) \[AASHTO T 99 - 01]
* 110409 || Proctor - Modified (Metric) \[AASHTO T 180 - 01]
* 110410 || Proctor - Modified (Metric) \[AASHTO T 180 - 11]
* 110413 || Proctor - Modified (Metric) \[ASTM D 1557 - 12] *
* 110414 || Proctor - Modified \[ASTM D 1557 - 12] *
* 110779 || Moisture-Density Relations of Base Material and Cohesionless Sand (Metric) \[Tex-113-E]
|-
| QPM-1893 || || Error messages that are displayed in QEST Scheduler now include information from QESTNet about the error that occurred.
|-
| QPM-1895 || QPS-1139 || Unconfined Compressive Strength Summary Test Report (Q 115) - no longer causes run time error error 91 when loading.
|-
| QPM-1896 || QPS-1167 || Remarks entered on the Daily Field Inspection test screen are no longer cleared when clicking on the info button and then off the test screen.
|-
| QPM-1897 || || Complex List Permissions set at the lab level now restrict users in accordance to the permissions granted. A common symptom of this was that a number of permission checks were only made against the global/default lab rather than for specific labs i.e. users who only had permissions at specific labs would not be able to access those lists at all.
|-
| QPM-1900 || || Options - General - The description of the Overwrite Checked by Status and Overwrite Tested by Status has been fixed so that it lines up with the actual behaviour of the options.
|-
| QPM-1907 || || A bug that resulted in a 'Catastrophic Failure when changing between laboratories and lists has now been fixed.
|-
| QPM-1910 || QPS-1220 || The value for Average Least Dimension on the _Average Least Dimension Calculation [AS 1141.20.3]_ Test Screen will now only be calculated if a value for 'Passing Largest Sieve' and 'Flakiness Index' has been provided.
|-
| QPM-1919 || QPS-1269 || The Time Sampled and Time Moulded will now show on the Concrete Test Report (AU), even when the Date Batched is not set.
|-
| QPM-1920 || || "A new menu item, call 'Display Document Identifiers', has been added to the view menu in QESTLab. This option is only available when a document has been selected in the tree. When this item is selected a form will be displayed that will show the following about the current selected document:
QestID - The internal QestID of the current document/screen.
QestUniqueID - An internal ID that uniquely identifies the instance of the current document/screen.
QestUUID - An internal universial ID that uniquely identifies the instance of the current document/screen."
|-
| QPM-1921 || QPS-1270 || "Q214A test portion results tolerances have been corrected
- Particle Density on a Dry Basis (t/mÂ³): 0.023 -> 0.032
- Particle Density on an SSD Basis (t/mÂ³): 0.019 -> 0.027
- Apparent Particle Density (t/mÂ³): 0.019 -> 0.027
- Water Absorption (%): 22 -> 0.31"
|-
| QPM-1926 || || The _Assigned Maximum Density [AS 1289.5.4.2]_ screen has been updated to allow the results of reduced test screens to be imported. Results can be imported from both the "standard effort" _Maximum Dry Density [AS 1289.5.1.1] *_ and "modified effort" _Maximum Dry Density [AS 1289.5.2.1] *_ tests.
|-
| QPM-1935 || || QESTLab test report scripting, that uses the function "Custom.SQL(...)", now has better logging, if errors occur in the processing.
|-
| QPM-1938 || QPS-1311 || Flakiness tests "AS 1141.15" and "RC302.11", which by default would 'ignore grading results', now default to use the grading results.
|-
| QPM-1942 || || Custom Fields will now correctly cross-fill on parent samples, when adding a test workflow in QESTField.
|}

File:External doc - user doc combos.png

2017-03-09T05:00:28Z

Gavin.schultz:

File:Equipment calibration external documents - Equip-only.png

2017-03-09T04:43:49Z

Gavin.schultz:

File:Equipment external calibration worksheet ctl3.png

2017-03-09T04:29:51Z

Gavin.schultz:

File:Equipment external calibration worksheet sel3.png

2017-03-09T04:29:44Z

Gavin.schultz:

File:Equipment external calibration worksheet ctl2.png

2017-03-09T04:29:29Z

Gavin.schultz:

File:Equipment external calibration worksheet calvalues2.png

2017-03-09T04:29:14Z

Gavin.schultz:

File:Equipment external calibration worksheet sel2.png

2017-03-09T03:57:18Z

Gavin.schultz:

File:Equipment external calibration worksheet calvalues1.png

2017-03-09T03:57:05Z

Gavin.schultz:

File:Equipment external calibration worksheet ctl1.png

2017-03-09T03:56:45Z

Gavin.schultz:

File:Equipment external calibration worksheet sel1.png

2017-03-09T03:56:32Z

Gavin.schultz:

Construction Hive:Construction Hive 1.500.977.0 Release Notes

2016-12-23T03:39:22Z

Gavin.schultz:

{|class="wikitable"
|- valign="top"
!Bug/CR ID
!Customer Code
!Customer Reference
!Product(s) Modified
!Name
!Release Notes
|- valign="top"
|style="background:white;"|Bug#6251
|style="background:white;"|INTERNAL
|style="background:white;"|
|style="background:white;"|QESTLab, Construction Hive
|style="background:white;"|Publishing error to Construction Hive: "An invalid character was found in text content"
|style="background:white;"|When publishing reports from QESTLab to Construction Hive, occasional errors have occurred with an error message such as: "AddMetadataFromField: An invalid character was found in text content". 
 
While the specific cause of this is unknown, a fix has been applied which will: 
(a) provide an error message which better identifies the field which caused the issue, and 
(b) only flag the issue as a warning rather than an error, such that an attempt will be made to publish the report even without the supplied metadata.
|- valign="top"
|style="background:white smoke;"|CR#3618
|style="background:white smoke;"|USTWI
|style="background:white smoke;"|
|style="background:white smoke;"|Construction Hive, QESTLab
|style="background:white smoke;"|Include field technicians on report distributions to Construction Hive
|style="background:white smoke;"|Field technicians may now be added automatically to the distribution list of reports published to Hive. This allows field technicians to access reports even when they may not have been added by the user to the report distribution. The option to control this is available in the QEST Admin Console, Construction Hive > Options:
<UL>
<LI>
Include field technician in distributions
</LI>
</UL>
Note that the field technician email will not be visible in the publishing window, but rest assured that it will be included in the generated publish package. 
 
In addition, reports published to Construction Hive previously required that all users related to the work order, samples and tests on a report have a company email address (i.e. with the company domain). This has been problematic for cases where such users either do not have an email address, or often in the case of field technicians, they are subcontractors or part-time employees who instead use a personal email address. 
 
To alleviate this, additional options have been added which will allow reports to be published without the details of these secondary users - specifically, the tested by, checked by and report signatory users. Two new options have been added to control this:
<UL>
<LI>
Exclude signed by users
</LI>
<LI>
Exclude tested by / checked by users
</LI>
</UL>
These options are pertinent to field technicians insofar as those people may have been not only field technicians but also have been specified as the tester or checker on a test.
|}

Construction Hive:Construction Hive 1.300.16624.2 Release Notes

2016-08-16T08:13:57Z

Gavin.schultz:

{|class="wikitable"
|- valign="top"
!Bug/CR ID
!Customer Code
!Customer Reference
!Product(s) Modified
!Name
!Release Notes
|- valign="top"
|style="background:white smoke;"|CR#3274
|style="background:white smoke;"|INTERNAL
|style="background:white smoke;"|
|style="background:white smoke;"|Construction Hive
|style="background:white smoke;"|Related documents links
|style="background:white smoke;"|When viewing the document details page for reports published from QESTLab, links are displayed for other test reports relating to the same work order.
|}

Construction Hive:Construction Hive 1.200.453.2 Release Notes

2016-06-29T08:27:03Z

Gavin.schultz:

Construction Hive:Construction Hive 1.200.493.0 Release Notes

2016-06-29T08:25:15Z

Gavin.schultz:

Construction Hive:Construction Hive 1.200.493.0 Release Notes

2016-06-29T08:25:02Z

Gavin.schultz:

[[Media:Release Notes 4.x.xxxx Bugs.xlsx|4.x.xxxx Release Notes - Bugs]] [[Media:Release Notes 4.x.xxxx CRs.xlsx|4.x.xxxx Release Notes - CRs]] 
{|class="wikitable"
|- valign="top"
!Bug/CR ID
!Customer Code
!Customer Reference
!Product(s) Modified
!Name
!Release Notes
|- valign="top"
|style="background:white;"|Bug#5769
|style="background:white;"|INTERNAL
|style="background:white;"|
|style="background:white;"|Construction Hive
|style="background:white;"|Blank pages are not displayed after no activity for 1 hour
|style="background:white;"|In some circumstances it was possible that, after an hour of inactivity and the expiry of a user session, the user would be presented with a blank page, or generic error 500 page, and be unable to proceed. This case should no longer occur.
|- valign="top"
|style="background:white smoke;"|Bug#5831
|style="background:white smoke;"|INTERNAL
|style="background:white smoke;"|
|style="background:white smoke;"|Construction Hive
|style="background:white smoke;"|Import/export improvements for large work orders and LTPs
|style="background:white smoke;"|Performance has been improved for publishing, imports and exports. This is a minor performance improvement for normal report publishing with large work orders, and a major performance improvement for LTP imports / exports.
|}