Template:QEST Platform 4.5.2971

QEST Platform 4.5.2971

Issue ID	Release Notes
QPM‑1242	In QESTField, the Precision set against the specification is now taken into account when determining whether to style a result, e.g. colouring the text in red, as out of specification.
QPM‑1243	A change has been made for the entry and display of data in QESTField. Numeric results that have specification limits displayed against them will be formatted according to the Precision set in the specification.
QPM‑1262	For the tests listed below, the equipment used for each test run can now be selected when Weighing Procedure is set to "Water". Additionally, "Vacuum Flask" can no longer be selected as the Container Type when Weighing Procedure is set to "Water". Max Specific Gravity and Density of Asphalt (Metric) [ASTM D 2041] (ID 117049) Rice Specific Gravity [ASTM D 2041] (ID 117050) Rice Specific Gravity [AASHTO T 209] (ID 117064) Rice Specific Gravity [NDOT T 324] (ID 117053)
QPM‑1265	Fixed several issues with the display of item status in the QESTLab tree: Items under "Tests/Documents" node will display the same status conditions as they would under the "Work Orders" node Reports which are "Ready to be Signed" will be displayed in blue when first loaded via a filter When loading a filter where items are grouped under multiple fields, combined status conditions will be displayed on every parent group (previously these only displayed on the item's immediate parent group)
QPM‑1271	When using the screen for Proctor - Standard [AASHTO T 99 - 2015] the Layers and Blows are now populated based on the selected Method.
QPM‑1344	Fixed an issue where "Nominal Aggregate Size (mm)" was not saving correctly for US Los Angeles Abrasion Value screens in metric laboratories. Fixed an issue where "Nominal Aggregate Size (mm)" would not be correctly imported from the Size value of the parent sample's material in certain circumstances. Added "Nominal Aggregate Size (mm)" to the reported fields of the following tests, as required by the relevant standards: Los Angeles Abrasion Value [ASTM C 131 - 06] (ID 110160) Los Angeles Abrasion Value [ASTM C 131 - 06]* (ID 110357) LA Abrasion [AASHTO T 96 - 2010] (ID 110164) The field previously labelled "Test Grading" on the reduced screen Los Angeles Abrasion Value [ASTM C 131 - 06]* (ID 110357) will now be labelled "Grading Designation" to be consistent with the terminology of the standard.
QPM‑1487	For the following tests, where masses are meant to be recorded in grams (g), the labels mistakenly indicated entry in pounds (lb): (ID 110338) Percentage of Fractured Particles in Coarse Aggregate [ASTM D 5821 - 2001] (ID 110343) Percentage of Fractured Particles in Coarse Aggregate [ASTM D 5821 - 2006] These captions have been fixed. The test (ID 110344) Percentage of Fractured Particles in Coarse Aggregate (Imperial) [ASTM D 5821 - 2006], which has Nominal Maximum Size in IP units, has been changed so that by default masses are recorded in grams. A document-level option, "Record masses in lb", is available for this test if data entry in pounds is still required. When using pounds, the mass can now be entered to the nearest 0.0001 lb. Masses for all of these tests are always given in grams on the test report.
QPM‑1492	Fixed a bug where field "WC Method" was always reported for Relative Compaction [ASTM] (ID 110201). This field will now only report when a moisture content method has been selected on a sibling In-Situ Density - Sand Cone Method [ASTM D 1556 - 2015] (ID 110305) test.
QPM‑1581	An issue where the "Days Left on Site" field on the Concrete Sample can overflow and cause QESTField to show an error has been fixed. Additionally, for both QESTField and QESTLab, when the "Date Cast" is changed while "Days Left on Site" has a value, the "Date Received" will be calculated from these values. Previously, a shift in the "Date Cast" would produce a shift in the number of curing days (the "Standard Curing Days" field, shown as "Std Cure" in the concrete specimens grid in QESTLab). Now, when the "Date Received" is automatically shifted by the same number of days as the "Test Date", it will not change the "Standard Curing Days".
QPM‑1637	Fixed an issue where concrete specimens created via the concrete bulk entry (either by selecting the test group or using a work template) would cause an Error 13 message to appear when loading the Concrete Test Report.
QPM‑1643	Fixed an issue where adding a Billable Item (ID 20040) without selecting a Test would cause "Invalid Use of Null" errors when adding an entry to the Fee Schedule list (ID 20005).
QPM‑1672	An issue where the PDF Password input for the QEST Administrator Console does not grey out properly has been fixed
QPM‑1673	Fixed an issue where an Error 5 message would appear when loading a Concrete Sample bulk entry screen for customers not licensed for the Concrete Mix list (ID 20021)
QPM‑1675	Fixed an issue where an Error 91 message could be raised when QESTLab triggered an update when no object was loaded (for example immediately after an object was deleted).
QPM‑1676	An issue where the "Age in Days" (AgeDays) field on the Concrete Specimen can overflow and cause QESTField to show an error has been fixed.
QPM‑1683	An issue where the "Days Left On Site" field on the Concrete Specimen was not being updated from the Concrete Sample has been fixed.
QPM‑1687	Fixed a bug where results from a sibling grading test were imported over results entered onto Clay Lumps and Friable Particles test screens when "Ignore Grading Results" was checked.
QPM‑1690	Fixed an issue where attempting to load a Wet/Dry Strength Variation test would raise an Error 13: Type Mismatch message.
QPM‑1698	Fixed issue where SQL errors could occur when inserting new Billable Item (ID 20040) list entries.
QPM‑1701	Fixed a bug where concrete sample fields could clear for customers not licensed for the Concrete Mix list (ID 20021). Fixed a bug where the bulk entry on the work order screen would refresh twice on loading. On the work order screen's sample bulk entry, the Sample Type selection will now be locked when the screen is busy processing another request (eg. changing the number of samples).
QPM‑1705	Fixed an issue where Item Name and Charge would be cleared when automatic billing was triggered for manually entered Billing rows, where the associated Billable Item entry was set as editable.
QPM‑1711	Fixed an issue where the Masonry Report (ID 18958) would show an "Error 91" message on load. Fixed an issue where masonry specimens of type MORCUBE could not be reported.