QEST Platform 4.5.2939

Bug/CR ID	Customer Code	Release Notes
QPM_1632		Fixed a bug which caused some combo list selections to clear when a test screen was refreshed.
QPM_1629		QESTLab now runs on 32-bit systems again. Errors showing "Error 373: Failed to load from MSCOMCTL.OCX" are no longer seen.
QPM_1598	MEFUG	TRN will no longer be locked on applicable bulk entry views for Aggregate/Soil samples (ID 1001) and Asphalt samples (ID 1701). Note that when TRN is changed on the Work Order the new value will replace the sample-level TRN.
QPM_1576		A bug where the user cannot click out of the Client / Project / Project owner code field on the Work Order screen in QESTLab has been fixed.
QPM_1574	AUVIC	On the following calibration worksheets for Balance (ID 30005), if Check Mass is greater than the largest load on the associated Balance Calibration Data Entry (ID 31010) worksheet then fields will now import from the reading with the largest load as long as Check Mass is within the specified Scale Range. Balance Single-Point Check [NATA Technical Note 13] (ID 31005) Balance Single-Point Check [NATA Technical Note 13 - 2014] (ID 31017) Balance Single-Point Check when Moving [NATA Technical Note 13] (ID 31008)
QPM_1573	USTWI	A performance improvement has been made to the loading of work order data for QESTField Scheduler.
QPM_1572	USTWI	A change has been made to improve performance when loading technician data for the QESTField Scheduler.
QPM_1571	USTWI	A change has been made to improve performance when loading laboratory data for the QESTField Scheduler.
QPM_1568	NZFUH	Old versions of windows label has been removed from splash screens.
QPM_1567	AUHAN	The "Truck does not match" prompt in QESTField has been reworded.
QPM_1550	MEFUG	An issue caused by certain company time zone settings that prevented new recipients from having documents distributed to them has been fixed.
QPM_1549	AUHAN	UI performance when editing user document configuration now scales a lot further when editing tables that have large numbers of columns.
QPM_1548		The following changes have been made for California Bearing Ratio tests in (10215,10222,10223,10224,10225,10226,10227,10228,10235,10237,10239,10592): The Raw Force value recorded at 0.0mm depth is now considered as a zero correction and is used to calculate all Force values. The zero offset will be copied to Seating values if no values are entered for Seating values. A new document level option is created to allow copying seating values to CBR Results tab as zero correction.
QPM_1547		The following for default format is now used for all user documents: Field Type, Default Format Integer, 0 Decimal, 3sf Bit, List:True;Flase Money, 0.00 Float, 3sf DateTime, Short Date
QPM_1546		Construction Hive now prevents notifications in silent publishing for reports with existing non-silent revisions.
QPM_1545	AUCHA	Bulk publishing no longer produces corrupt PDFs due to multiple report types (e.g. Active Reports and PDFs) being passed in.
QPM_1544		Specification Group names can now be up to 50 characters (previously set to 25)
QPM_1543		A bug where lab-specific technicians could appear in dropdown selections when the Sampled By list (ID 20006) was set to "Global Only" has been fixed.
QPM_1514	USPSI	The header "Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds" of CIP100 specimens in Concrete Test Reports is now corrected to refer "Cylindrical" instead of "Cylinderical".
QPM_1479		For the following moisture content test screens, the field Nominal Aggregate Size (mm) has been replaced with the dropdown selection Maximum Particle Size to indicate the maximum sieve size with 100% material passing in accordance with standard ASTM D 2216. Water Content of Soil and Rock [ASTM D 2216] (ID 110060) Moisture Content of Soil and Rock [ASTM D 2216 - 2010] (ID 110066)
QPM_1439	USHVJ	Fixed an issue where publishing an email to contacts with commas in their name could raise a "Subscript out of range" error.
QPM_1368	USTWI	When publishing a document the distribution list is still populated when a deleted user is a member of the project.
QPM_1367	USTWI	This change attempts to resolve an occasional error that occurred during publishing, "Error while publishing binary: Error -2147024882: Not enough storage is available to complete this operation". It also adds further detail to error messages in this area to help identify the location where the error occurs.
QPM_1366		A bug where user document column names containing hyphens could not be deleted has been fixed. These are now correctly enclosed in square brackets, and escaped if necessary.
QPM_1365	USWSB	The moisture content rounding of "oven-dried" moisture content is to nearest 0.1% for Moisture, Ash and Organic Content [ASTM D 2974 - 2007].
QPM_1364	AUDEW	An issue where Density Offset Report (ID 17036) could not be loaded has been fixed.
QPM_1363	NZGEO	The test method no longer reports twice on the nuclear density report.
QPM_1362	USPSI	The following can no longer appear in the Accredited Documents trees in the QEST Administrator Console, as they are not applicable: (ID 18010) Billing (ID 18015) Billing Summary (ID 18019) Invoice (ID 18020) Timekeeping (ID 18021) Timekeeping Records (ID 90022) Archived Test Report
QPM_1361		The bug where the Hanson "Concrete Test Delete Export" integrator was not being invoked correctly from QESTField/QESTNET has been fixed.
QPM_1360	NZGEO	Reports with NZGEO Custom Header now load without errors when the preliminary field value is null.